Every house does not have a sump pump, however, if you happen to live in an area with high chances of flooding, heavy rainstorms, or the water level is too high; your home does need the protection of a sump pump. It is generally installed underneath the basement floor so it can collect and pump the groundwater before it reaches the floor level to flood the house.
How Can A Sump Pump Be Beneficial For Your Home?
It is a device that regularly works against groundwater intrusion which is activated by a float after the water level reaches a certain height. When it activates, it simply pumps out the water collected in the sump pit. It captures the groundwater reaching the house from all directions through permeable rock-filled drains which are linked with sump pit where the pump collects the water and pumps it back outside.
Sump pumps have the capacity to pump out large quantities of waters so they also work as protection during an event of heavy unexpected rainfall. These pumps can have a discharge flow rate of four to six thousand gallons per hour which means that a higher quality sump pump can expel water in case of an unexpected minor flooding event caused by a broken pipe.
How Frequently Do You Need To Maintain Your Sump Pump?
It is recommended to at least have a yearly routine maintenance checkup on your sump pump to ensure that it is in the right condition to protect to your house from groundwater. If possible, do a quarterly checkup to be able to diagnose if any maintenance work is required because of the changing weather or any other reason. The groundwater level generally rises with the start of spring because of snow-melt, it is an ideal time to check your pump in late winters or start of the spring season.
How To Check If Your Pump Is Working Right?
It is not as difficult to check the pump as compared to a sump pump installation minneapolis mn. The lowest point in a house is the best place to find where the sump pump might be installed. Mostly, the pump is either installed in the basement of a crawl space as it is useless to install them above ground level. Following are the easy checks to diagnose if your pump is working right:
Sump pumps have an electric input that powers them which is generally a GFCI electrical connection. If your pump is not working it might as well be the electric input connection that is not supplying the power to the pump to do its job. Due to constant vibrations or less support the sump pumps may tilt, it is important for the pump to be upright so that the float can move freely. Fill the sump pit with water to the level that the float reaches the height where it activates the pump. If the pump discharges the water out it is working right otherwise some maintenance might be required.